Description
20% OFF! Installed Sample
This speaker was installed but has not been used due to not fitting inside the combo it was supposed to be installed in. Includes full manufacturer's warranty. Any possible cosmetic issues, including pierced screw holes on the outer surround flange or marks to the back plate sticker are not covered by warranty. All sales are final on this speaker.
A high powered 12" guitar speaker featuring ultra-clean tone with big, round, punchy lows and warm, smooth mids and highs. A more neutral tone so you can hear more of your amp and guitar.
Manufacturer Spec Sheet
Specification | |
Nominal Basket Diameter | 12", 305 mm |
Nominal Impedance* | 8 Ω |
Power Rating* | |
Program Power | N/A |
Watts | 200 W |
Resonance | 49 Hz |
Usable Frequency Range | 60 Hz - 4.9 kHz |
Sensitivity* | 101.1 dB |
Magnet Weight | 80 oz. |
Gap Height | 0.37", 9.5 mm |
Voice Coil Diameter | 2.5", 64 mm |
Thiele & Small Parameters | |
Resonant Frequency (fs) | 49 Hz |
DC Resistance (Re) | 6.6 Ω |
Coil Inductance (Le) | 0.49m H |
Mechanical Q (Qms) | 7.39 |
Electromagnetic Q (Qes) | 0.29 |
Total Q (Qts) | 0.28 |
Compliance Equivalent Volume (Vas) | 102.31 liters / 3.61 cu.ft. |
Peak Diaphragm Displacement Volume (Vd) | 68 cc |
Mechanical Compliance of Suspension (Cms) | 0.26 mm/N |
BL Product (BL) | 16.9 T-M |
Diaphragm Mass Inc. Airload (MMs) | 40 grams |
Efficiency Bandwidth Product (EBP) | 170 |
Maximum Linear Excursion (Xmax) | 1.27 mm |
Surface Area of Cone (Sd) | 532.4 cm2 |
Maximum Mechanical Limit (Xlim) | N/A |
Mounting Information | |
Recommended Enclosure Volume | |
Sealed | Acceptable |
Vented | Acceptable |
Driver Volume Displaced | 0.09 cu.ft. / 2.55 liters |
Overall Diameter | 12.38", 314.5 mm |
Baffle Hole Diameter | 11.07", 281.2 mm |
Front Sealing Gasket | Yes |
Rear Sealing Gasket | Yes |
Mounting Holes Diameter | 0.26", 6.6mm |
Mounting Holes B.C.D. | 11.57", 293.9mm |
Depth | 5.38", 136.5 mm |
Net Weight | 16.3 lbs, 7.39 kg |
Shipping Weight | 18 lbs, 8.16 kgs |
Materials of Construction | |
Coil Construction | Edge wound aluminum voice coil |
Coil Former | Polyimide former |
Magnet Composition | Ferrite magnet |
Core Details | Vented core |
Basket Materials | Die cast aluminum basket |
Cone Composition | Paper cone |
Cone Edge Composition | Cloth edge |
Dust Cap Composition | Paper dust cap |